Tags


A solution to I/O errors on some external USB 3 HDD enclosures

First written on June 16, 2020
Last updated on September 13, 2021

I bought several Inatek fe 3001 USB HDD enclosures for my backups.

This model is reported like this by $ lsusb:

ID 174c:55aa ASMedia Technology Inc. Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge

Suddenly I got read error from input device (I/O error) from $ dmesg and then the filesystem unmounted automatically.

I tried:

Nohing worked.

Apparently, to get the thing working, you must disable UAS (USB Attached SCSI) for this particular chipset.

Solution

If you use Syslinux as the bootloader and certain kernels:

  1. add the following kernel parameter to the APPEND line in /boot/syslinux/syslinux.cfg:

    usb-storage.quirks=174c:55aa:u
    
  2. reboot
  3. run $ lsusb -t and check that the Driver entry now reads usb-storage instead of uas

This works for example with Parabola GNU/Linux-libre.

Some websites say to blacklist the module within /etc/modprobe.d. That depends on your kernel.

References


Post a new comment